META-ACRYLIC (H) Acrylic Systems- Hardner Liquid, 128oz - META-ACR-H128 by Metallurgical Supplies from Buffalo
Product Code: META-ACR-H128

META-ACRYLIC (H) Acrylic Systems- Hardner Liquid, 128oz - META-ACR-H128 by Metallurgical Supplies from Buffalo

Product Code: META-ACR-H128
Availability: 1000
Viewed 10446 times
Acrylic User Guide.  Has very informative information and quick cheats.   DOWNLOAD POLISHING GUIDE

 

Item specifics

  • Color Yellow Transparent
  • Curing Time 12 Minutes
  • Material META-ACRYLIC (H)
  • Mix Ratio 2 : 1
  • Peak Temp 150°
  • Peak Temp 150°
  • Shore D 82
  • Shore D 82
  • Size 128 oz
  • Type Thermoplastic

Product Description

META-ACRYLIC (H) comes in a size of a 128 oz. Having a Mix Ratio of 2 : 1 With a cure time of 12 Minutes. When reaching its Peak Temperature of 150°, finishing with a color of Tint Clear Yellow, with Shore D Hardness of 82. This product is a Thermoplastic



TECHNICAL SPECIFICATIONS
Material: META-ACRYLIC (H)
Mix Ratio: 2 : 1
Curing Time: 12 Minutes
Peak Temp: 150°
Color: Tint Clear Yellow
Shore D: 82
Type: Thermoplastic



META-ACRYLIC (H) Acrylic Systems- Hardner Liquid, 128oz - Acrylic Cold Mounting Brochure Guide - Acrylics main advantage of mounting with castable acrylics is the fast curing time. Depending upon the mixing ratio, castable acrylic mounts are typically ready to use within 8-15 minutes. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because both the liquid and powder are acrylics with various additives and curing agents. The advantages of mounting with acrylics resins include:  - Rapid mounting - Very repeatable and consistent mounts - Moderate shrinkage - Good hadness - Semi-transparent - High odor

Write a review

Note: HTML is not translated!
    Bad           Good