META-ACRYLIC (R) Acrylic Systems - Resin Powder, 1lb - META-ACR-R1 by Metallurgical Supplies from Buffalo
Product Code: META-ACR-R1

META-ACRYLIC (R) Acrylic Systems - Resin Powder, 1lb - META-ACR-R1 by Metallurgical Supplies from Buffalo

Product Code: META-ACR-R1
Availability: 1000
Viewed 10327 times
Acrylic User Guide.  Has very informative information and quick cheats.   DOWNLOAD POLISHING GUIDE

 

Item specifics

  • Color VARIES RESIN
  • Curing Time 10 -15 Minutes
  • Material META-ACRYLIC (R)
  • Mix Ratio 2 : 1
  • Peak Temp 150°
  • Peak Temp 150°
  • Shore D VARIES RESIN
  • Shore D 80-84
  • Size 1 lb
  • Type Thermoplastic

Product Description

META-ACRYLIC (R) comes in a size of a 1 lb. Having a Mix Ratio of 2 : 1 With a cure time of 10 -15 Minutes. When reaching its Peak Temperature of 150°, finishing with a color of VARIES RESIN, with Shore D Hardness of 80-84. This product is a Thermoplastic



TECHNICAL SPECIFICATIONS
Material: META-ACRYLIC (R)
Mix Ratio: 2 : 1
Curing Time: 10 -15 Minutes
Peak Temp: 150°
Color: VARIES RESIN
Shore D: 80-84
Type: Thermoplastic



META-ACRYLIC (R) Acrylic Systems - Resin Powder, 1lb - Acrylic Cold Mounting Brochure Guide - Acrylics main advantage of mounting with castable acrylics is the fast curing time. Depending upon the mixing ratio, castable acrylic mounts are typically ready to use within 8-15 minutes. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because both the liquid and powder are acrylics with various additives and curing agents. The advantages of mounting with acrylics resins include:  - Rapid mounting - Very repeatable and consistent mounts - Moderate shrinkage - Good hadness - Semi-transparent - High odor

Write a review

Note: HTML is not translated!
    Bad           Good