15 µm - CARAT Diamond Grinding Disc - (PSA), 200 mm - GCAR-200-15P by Metallurgical Supplies from Buffalo
Product Code: GCAR-200-15P

15 µm - CARAT Diamond Grinding Disc - (PSA), 200 mm - GCAR-200-15P by Metallurgical Supplies from Buffalo

Product Code: GCAR-200-15P
Availability: 1000
Viewed 10412 times

Item specifics

  • Backing PSA
  • Bond Type Resin Bond
  • Diameter 200 mm
  • For Material Brittle Nitride& Oxide Steels
  • Micron Size 15 µm
  • Packaged As Each

Product Description

CARAT with self-adhesive backing is a self-sharpening diamond disc for fine-grinding applications, replacing traditional SiC paper. Brittle materials such as nitride and oxide layers on steel can be ground without chipping, materials with low dimensional stability can be processed without deformation. Short process times, flat surfaces and superior edge sharpness are achieved due to precision graded diamond and optimized grit concentration. Max speed: 15m/s Grinding pressure: 5-7 N/cm2 for steel and comparable materials 13 N/cm2 for ceramics Typical application: Fine-grinding of cold and hot mounted specimen Mounting: Stainless steel plate with special grip surface/ flexible adhesive backing Coolant: Water Self-sharpening Dressing is not necessary due to the self-sharpening characteristics, leading to prolonged life time, reduced costs and high repeatability. Precision graded micron diamond sizes Narrow particle size distribution maximizes the amount of particles of the same size while fine and coarse particles are minimized. This feature allows for both high process reproducibility and superior results in surface quality. Flexible base The flexible base absorbs vibrations and thus reduces material fractures and prevents corrosion.

Write a review

Note: HTML is not translated!
    Bad           Good