4-inch CBN Resin Bond Wafering Blades, High Concentration, ( 15.875mm Arbor ), Each - WB-4-CBN15 by Metallurgical Supplies from Buffalo
Product Code: WB-4-CBN15

4-inch CBN Resin Bond Wafering Blades, High Concentration, ( 15.875mm Arbor ), Each - WB-4-CBN15 by Metallurgical Supplies from Buffalo

Product Code: WB-4-CBN15
Availability: 1000
Viewed 8 times

Item specifics

  • Blade Arbor INCHES 0.625"
  • Blade Arbor MM 15.875mm
  • Blade Diameter INCHES 4"
  • Blade Diameter MM 102mm
  • Blade Thickness INCHES 0.015"
  • Diamond Blade Type CBN Resin Bond
  • Diamond Blade Concentration High Concentration

Product Description

CBN Bond Blades High Concentration are composed of a resin bonding creates less heat, provides better surface finish and is well suited for cutting hard, delicate or brittle materials.  CBN Cut-off Blade (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt-based alloys, nickel-based superalloys and lead-based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.
CBN Resin Bond Recommended for sectioning hard steels above HRc 60. Most commonly used at higher (>1000 RPM) speeds.  For cutting of extremely hard ferrous metals (HV 500 - 1400)

Materials recommended for cutting with CBN Bond Blades High Concentration:

Alloy steels (45-68 RC), Carbon tool steels (45-68 RC), Die steel (45-68 RC), High speed steel (45-68 RC), Chilled cast iron, Ni-Hard, Forged steel, Meehanite iron, Moly chrome steel rolls, Inconel 600, Rene, Incoloy, Monel, Stellite, Colmonoy, Waspoloy.

 

 

Write a review

Note: HTML is not translated!
    Bad           Good