3-inch x 0.006-inch x 0.5-inch - Diamond Cut-off Wheel, Resin Bonded, (1/Pkg) - WB-3-R by Metallurgical Supplies from Buffalo
Product Code: WB-3-R

3-inch x 0.006-inch x 0.5-inch - Diamond Cut-off Wheel, Resin Bonded, (1/Pkg) - WB-3-R by Metallurgical Supplies from Buffalo

Product Code: WB-3-R
Availability: 1000
Viewed 10219 times

Item specifics

  • Type Resin Bond
  • Concentration High Concentration
  • Size 3-inch (76.0 mm)
  • Thickness 0.006-inch (0.15 mm)
  • Arbor 0.5" (12.7 mm)

Product Description

Diamond Wafering Blade Resin Bonded recommended for aggressive cutting, ferrous and non-ferrous materials, for hard, delicate or brittle materials.
Resin Bond Diamond is recommended for cutting hard, brittle and delicate materials. Such as ceramics, carbides, and exotic metals where low heat generation or improved surface finish is desired. Should be used at higher speed. CBN Resin Bond is recommended for cutting hard steels above Rc 50 at high speeds. Diamond Cut-off Wheel Resin Bond is the softest of all the bonds, frequently used in applications that require a smooth surface finish and minimum amount of chipping.

For cutting of sintered carbides and ceramics (> HV 800)

Write a review

Note: HTML is not translated!
    Bad           Good