META-HOT D2-T  DUAL Automatic Touch Screen Hot Mounting Press - META-HOT D2-T by Metallurgical Supplies from Buffalo
Product Code: META-HOT D2-T

META-HOT D2-T DUAL Automatic Touch Screen Hot Mounting Press - META-HOT D2-T by Metallurgical Supplies from Buffalo

Product Code: META-HOT D2-T
Availability: 1000
Viewed 10396 times

Product Description

META-HOT-D2-T DUAL Automatic Touch Screen Hot Mounting Press

META-HOT D2-T is a Dual Automatic Mounting Press with two cylinders has a solid, easy-to-use, robust design. With a 360° heating element intimately connected to the mold, heating is very efficient. Fully automatic operation with microprocessor controls, electro-hydraulic pressure (requires no air) the requirement to continually monitor and increase the force as the resin begins to melt is eliminated. With a touch panel screen for easy programming then saving your procedures to load for the next run faster. The unit comes with a mold assembly that can be easily changed into different sizes. This unit comes with all 5 mold assemblies, 25mm, 30mm, 40mm, 45mm, 50mm (if inches are needed, please request when requiring a quote) The unit requires a water source that will plug into the back of the machine for it to use during the cooling process of the procedure. With an intermediate ram allowing you to make 4 mounts per run. An intermediate ram is included with all 4 assemblies.

Mold Diameter25mm, 30mm, 40mm, 45mm, 50mmDisplayTouch Panel for easy programmingThermoforming Ranges194-392(°F)    (90-200°C)Cooling temperature range 104-194 (°F)    (40 -90°C)Holding time range0-30minCooling modeWater CoolingHeating power3200 watts total powerSystem pressure range580 - 2,610psi  (4-18 Mpa)Input Voltage220V 60HzDimension650mm x 630mm x 500mmNet Weight242klbs   (110kg)


Model

META-HOT D2-T

Mold Diameter

25mm, 30mm, 40mm, 45mm, 50mm

Display

Touch Panel for easy programming

Thermoforming Ranges

194-392(°F)    (90-200°C)

Cooling temperature range

 104-194 (°F)    (40 -90°C)

Holding time range

0-30min

Cooling mode

Water Cooling

Heating power

3200 watts total power

System pressure range

580 - 2,610psi  (4-18 Mpa)

Input Voltage

220V 60Hz

Dimension

650mm x 630mm x 500mm

Net Weight

242klbs   (110kg)

 

 

Write a review

Note: HTML is not translated!
    Bad           Good