META-HOT S1 Semi-Automatic Hot Mounting Press - META-HOT S1 by Metallurgical Supplies from Buffalo
Product Code: META-HOT S1

META-HOT S1 Semi-Automatic Hot Mounting Press - META-HOT S1 by Metallurgical Supplies from Buffalo

Product Code: META-HOT S1
Availability: 1000
Viewed 10365 times

Product Description

META-HOT S1 Semi-Automatic Hot Mounting Press

META-HOT S1 Semi-Automatic Hot Mounting Press is designed for purpose of the last process before polishing. It is setting up that small, difficult-to-hold or irregular specimens for the metallographic test. It can facilitate polishing and watch properly the ideal material structure and measure the hardness of the material by hardness tester. In the sample preparation process, this machine is controlled by an automatic program, including automatic heating, pressing, automatic cooling and automatic shutdown relief. This machine has the following features such as humanize, easy operation and superb efficiency. It is an ideal equipment for factory, scientific research institution, and colleges universities laboratory.

Semi-Automatic Principal

  • motor-driven gear, screw, and other components make the lower mold do the upward movement.
  • the subsequent pressing force of hot mount material squeezes the spring.
  • When pressed into the spring limit switch, pressure start time, with the mosaic materials melt the spring will continue to squeeze until the end of the dwell time.
  • This machine hot mounting material is limited to a thermosetting material. pressing temperatures for different thermosetting material can be adjusted and customized according to the material.

·Mold Diameter Sizes: φ22, φ30, φ45 (select one of these standard configurations when ordering)

·Thermoforming ranges:100-200℃
·Cooling temperature range:20-90℃
·Holding time range:0-999s 
·Heating power:1000 W
·Input voltage: 110V 50/60Hz
·Overall dimensions:390 mm×480 mm×470 mm
·Net weight: 48Kg

Modem Type:

META-HOT-S1-A

META-HOT-S1-B

META-HOT-S1-C

Mold Diameter Sizes

φ22

φ30

φ45

Thermoforming Ranges

100-200 ℃

100-200 ℃

100-200 ℃

Cooling Temps Range

20-90℃

20-90℃

20-90℃

Holding Time Range

0-999s

0-999s

0-999s

Heating power

1000 Watts

1000 Watts

1000 Watts

Input Voltage

110V 50/60Hz

110V 50/60Hz

110V 50/60Hz

Dimensions

390×480×470mm

390×480×470mm

390×480×470mm

Write a review

Note: HTML is not translated!
    Bad           Good