META-POLY (H) Polyester Systems - Polyester Fast Cure Hardener, 16oz - META-POLY-16 by Metallurgical Supplies from Buffalo
Product Code: META-POLY-16

META-POLY (H) Polyester Systems - Polyester Fast Cure Hardener, 16oz - META-POLY-16 by Metallurgical Supplies from Buffalo

Product Code: META-POLY-16
Availability: 1000
Viewed 9946 times
 

Item specifics

  • Curing Time 1½ - 2 Hours
  • Material META-POLY (H)
  • Mix Ratio 100gr : 13gr
  • Peak Temp 100°
  • Peak Temp High Clear
  • Shore D 76
  • Shore D 76
  • Size 16 oz
  • Type Duroplastic

Product Description

META-POLY (H) comes in a size of a 16 oz. Having a Mix Ratio of 100gr : 13gr With a cure time of 1½ - 2 Hours. When reaching its Peak Temperature of 100°, finishing with a color of High Clear, Transparent, with Shore D Hardness of 76. This product is a Duroplastic



TECHNICAL SPECIFICATIONS
Material: META-POLY (H)
Mix Ratio: 100gr : 13gr
Curing Time: 1½ - 2 Hours
Peak Temp: 100°
Color: High Clear, Transparent
Shore D: 76
Type: Duroplastic



META-POLY (H) Polyester Systems - Polyester Fast Cure Hardener, 16oz - Polyesters are typically used when a very clear mount is required. Polyester resins are also useful for mounting parts for display. In this case, the part appears suspended in the plastic. The procedure for molding samples for display is to first determine the mixing ratio of the resin to hardener (catalyst). This ratio is variable depending upon the mass of the casting. Characteristics of Polyester include: - Very clear (water clear) - High odor - Best resin system for making large castings

Write a review

Note: HTML is not translated!
    Bad           Good