6 µm - SQUADRO-M Diamond Grinding Disc - (PSA), 250 mm - GSQM-250-6P by Metallurgical Supplies from Buffalo
Product Code: GSQM-250-6P

6 µm - SQUADRO-M Diamond Grinding Disc - (PSA), 250 mm - GSQM-250-6P by Metallurgical Supplies from Buffalo

Product Code: GSQM-250-6P
Availability: 1000
Viewed 9813 times

Item specifics

  • Backing PSA
  • Bond Type Resin Bond
  • Diameter 250 mm
  • For Material Medium Hard, Resin
  • Micron Size 6 µm
  • Packaged As Each

Product Description

SQUADRO-M: RESIN, MEDIUM HARD MATERIAL SQUADRO-M and SQUADRO-H are innovative diamond grinding discs that extends fine grinding to single-micron grit sizes. With self-adhesive backing they replace conventional lapping processes, achieving superior results in terms of material removal rate, surface quality, and work piece geometry and tool life. SQUADRO diamond grinding discs provide for an easy, clean and efficient fine grinding process. Properties Diameter: 200/ 250/ 300/ 350 mm, larger diameters (up to 760 mm) on request Diamond size: 60 μm/ 30 μm/ 15 μm/ 6 μm/ 3 μm Diamond type: RBM Base: textile base Mounting: stainless steel carrier/ self-adhesive (PSA) Abrasive layer thickness: 0,4 mm Max speed: 15 m/s Grinding pressure: 5-7 N/cm2 for steel and comparable materials 13 N/cm2 for ceramics Coolant: Water

Write a review

Note: HTML is not translated!
    Bad           Good