Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV350-1000 - 10-60Rx by Metallurgical Supplies from Buffalo
Product Code: 10-60Rx

Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV350-1000 - 10-60Rx by Metallurgical Supplies from Buffalo

Product Code: 10-60Rx
Availability: 1000
Viewed 10018 times

SuperCut Series Grade

Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV350-1000
Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV250-800
Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV250-750
Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV80-700
Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV30-250

Item specifics

  • Material Type Very Hard Ferrous Metals
  • Diameter 250mm (10")
  • Thickness 1.5mm
  • Arbor 32mm
  • Rockwell Scale HRc 60

Product Description

Super Cut 250mm (10") x 1.5mm x 32mm 10/Box, HV350-1000

 

Used for Cutting Very Hard Ferrous Metals, HrC 60+ or HV Range 350-900

 

Selecting the right cut-off wheel ensures freedom from burn and distortion and is the best way to save time and consumables. Correct cutting produces specimens which are in perfect condition for the next preparation steps. The most commonly used abrasives for the cutting of different materials are Silicon Carbide and Aluminum oxide. Silicon carbide is suitable for non-ferrous metals whereas Aluminum oxide is referred for ferrous metals. Hard wheels are used for cutting soft materials while soft wheels are recommended for cutting harder materials. Metallurgical Supplies develops a history breaking cutting wheel named the SuperCut. SuperCut wheels are used to obtain superior cut surfaces. Metallurgical Supplies SuperCut series wheels are suitable for routine laboratory applications requiring a balance between wheel life and performance.

Write a review

Note: HTML is not translated!
    Bad           Good