RED TITAN-Force 250mm (10-inch) x 2mm x 32mm 10/Box, Titanium, Non Ferrous Metals - 10C-RTF by Metallurgical Supplies from Buffalo
Product Code: 10C-RTF

RED TITAN-Force 250mm (10-inch) x 2mm x 32mm 10/Box, Titanium, Non Ferrous Metals - 10C-RTF by Metallurgical Supplies from Buffalo

Product Code: 10C-RTF
Availability: 1000
Viewed 9416 times
 

Item specifics

  • Arbor 32mm
  • Diameter IN 10-inch
  • Diameter MM 250mm
  • Material Type Titanium, Non-Ferrous - Soft Metals,Very Ductile Metals
  • Thickness 2.0mm

Product Description

RED TITAN-Force 250mm (10-inch) x 2mm x 32mm 10/Box, Titanium, Non Ferrous Metals, Used for Cutting Titanium, Non-ferrous soft metals (HV < 275) and Very ductile metals (50 < HV < 375)

RED TITAN-Force Cutting Wheels Series that are used for sectioning of Titanium, Non Ferrous Metals, Used for Cutting Titanium, Non-ferrous soft metals (HV < 275) and Very ductile metals (50 < HV < 375).
Titanium is a chemical element. By virtue of its low density compared to most metals, it is referred to as one of the light metals. It is silver-white in color. Since titanium rarely occurs in its pure state naturally, it is primarily obtained from titanium ore. The production process is laborious and the material is, therefore, several times more expensive than stainless steel, for example. As an alloy with other elements, titanium can achieve special properties such as a low weight with high stability and high resistance to corrosion. Titanium is therefore used for the most challenging of tasks.  When grinding titanium, the user needs to process the material at a low cutting speed on account of the specific material properties of titanium. To achieve perfect stock removal results, we recommend a cutting speed of 12 - 15 m/s and the use of a hard contact wheel.
Metallurgical Supplies develops a history breaking cutting wheel named the TITAN-Force that is an excellent choice for processing titanium.

Write a review

Note: HTML is not translated!
    Bad           Good