Diamond Cut-off Wheel Arbor 32mm - by Metallurgical Supplies a Metallography World Corporation

Grid View:
Quickview

10-inch x 0.043-inch x 1.25-inch - Diamond Cut-off Wheel, High Concentration, (1/Pkg)

(0)

Diamond Wafering Blade High Concentration Recommended for metal matrix composites, titanium, thermal spray coatings, printed circuit boards, bones. Also excellent for cutting rock, re-factory, mineral, ceramic, glass, cement, concrete, and other non-metallic materials. For general use with ferrous and non-ferrous alloys; copper, aluminum, metal mat..

Quickview

10-inch x 0.043-inch x 1.25-inch - Diamond Cut-off Wheel, Low Concentration, (1/Pkg)

(0)

Diamond Wafering Blade Low Concentration Recommended for cutting brittle materials that would be found with certain glasses and ceramics, also for ceramics, glass, alumina, zirconia, concrete, electronic substrates.  Diamond Cut-off Wheel for precision cutting of ceramics and minerals. For use with hard/brittle materials such as Glass, Al203, Zr203..

Quickview

10-inch x 0.043-inch x 1.25-inch - Diamond Cut-off Wheel, Resin Bonded, (1/Pkg)

(0)

Diamond Wafering Blade Resin Bonded recommended for aggressive cutting, ferrous and non-ferrous materials, for hard, delicate or brittle materials. Resin Bond Diamond is recommended for cutting hard, brittle and delicate materials. Such as ceramics, carbides, and exotic metals where low heat generation or improved surface finish is desired. Should ..

Quickview

10-inch x 0.051-inch x 0.5-inch - CBN Diamond Cut-off Wheel, (1/Pkg)

(0)

CBN Cut-off Wheel (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt based alloys, nickel based super alloys and lead based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.  Materials recommended for cutting with CBN: ·         Alloy steels (45-68..

Quickview

12-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, High Concentration, (1/Pkg)

(0)

Diamond Wafering Blade High Concentration Recommended for metal matrix composites, titanium, thermal spray coatings, printed circuit boards, bones. Also excellent for cutting rock, re-factory, mineral, ceramic, glass, cement, concrete, and other non-metallic materials. For general use with ferrous and non-ferrous alloys; copper, aluminum, metal mat..

Quickview

12-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, Low Concentration, (1/Pkg)

(0)

Diamond Wafering Blade Low Concentration Recommended for cutting brittle materials that would be found with certain glasses and ceramics, also for ceramics, glass, alumina, zirconia, concrete, electronic substrates.  Diamond Cut-off Wheel for precision cutting of ceramics and minerals. For use with hard/brittle materials such as Glass, Al203, Zr203..

Quickview

12-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, Resin Bonded, (1/Pkg)

(0)

Diamond Wafering Blade Resin Bonded recommended for aggressive cutting, ferrous and non-ferrous materials, for hard, delicate or brittle materials. Resin Bond Diamond is recommended for cutting hard, brittle and delicate materials. Such as ceramics, carbides, and exotic metals where low heat generation or improved surface finish is desired. Should ..

Quickview

12-inch x 0.070-inch x 0.5-inch - CBN Diamond Cut-off Wheel, (1/Pkg)

(0)

CBN Cut-off Wheel (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt based alloys, nickel based super alloys and lead based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.  Materials recommended for cutting with CBN: ·         Alloy steels (45-68..

Quickview

14-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, High Concentration, (1/Pkg)

(0)

Diamond Wafering Blade High Concentration Recommended for metal matrix composites, titanium, thermal spray coatings, printed circuit boards, bones. Also excellent for cutting rock, re-factory, mineral, ceramic, glass, cement, concrete, and other non-metallic materials. For general use with ferrous and non-ferrous alloys; copper, aluminum, metal mat..

Quickview

14-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, Low Concentration, (1/Pkg)

(0)

Diamond Wafering Blade Low Concentration Recommended for cutting brittle materials that would be found with certain glasses and ceramics, also for ceramics, glass, alumina, zirconia, concrete, electronic substrates.  Diamond Cut-off Wheel for precision cutting of ceramics and minerals. For use with hard/brittle materials such as Glass, Al203, Zr203..

Quickview

14-inch x 0.059-inch x 1.25-inch - Diamond Cut-off Wheel, Resin Bonded, (1/Pkg)

(0)

Diamond Wafering Blade Resin Bonded recommended for aggressive cutting, ferrous and non-ferrous materials, for hard, delicate or brittle materials. Resin Bond Diamond is recommended for cutting hard, brittle and delicate materials. Such as ceramics, carbides, and exotic metals where low heat generation or improved surface finish is desired. Should ..

Quickview

14-inch x 0.070-inch x 0.5-inch - CBN Diamond Cut-off Wheel, (1/Pkg)

(0)

CBN Cut-off Wheel (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt based alloys, nickel based super alloys and lead based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.  Materials recommended for cutting with CBN: ·         Alloy steels (45-68..

Quickview

16-inch x 0.070-inch x 0.5-inch - CBN Diamond Cut-off Wheel, (1/Pkg)

(0)

CBN Cut-off Wheel (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt based alloys, nickel based super alloys and lead based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.  Materials recommended for cutting with CBN: ·         Alloy steels (45-68..

Quickview

18-inch x 0.078-inch x 0.5-inch - CBN Diamond Cut-off Wheel, (1/Pkg)

(0)

CBN Cut-off Wheel (Cubic Boron Nitride), composed of resin bond - high concentration recommended for iron and cobalt based alloys, nickel based super alloys and lead based alloys.  Cubic Boron Nitride (CBN) - often used for machining materials with high metallic content.  Materials recommended for cutting with CBN: ·         Alloy steels (45-68..

Showing 1 to 14 of 14 (1 Pages)