Ultrasonic Flaw Detector - by Metallurgical Supplies a Metallography World Corporation

Based on the ultrasonic principle, digital ultrasonic flaw detector can test, orient, evaluate and diagnose various flaws such as crack, lard, air hole in workpiece’s interior swiftly and accurately without any destruction. With full digital 640X480 TFT LCD display, it shows the defect clearly under the dim light and strong sunlight environment. 0-9999mm measuring range can meet the requirement for general defect inspection in the manufacturing industry, metallurgical industry, metal processing industry, chemical industry and so on. Low power design with large capacity and high-performance lithium-ion battery moduleit can work more than 10 hours continuously. Full English master-slave menu, emphasizing on user experience, collecting shortcut keys, digital shuttle rotary wheel, cross menu three operating ways in one body, customers with different habits can operate it freely. With comprehensive performance self-checking function, it can automatically generate test reports and support for many languages. With high-cost performance, it is the smart choice for the practical economic model of ultrasonic testing equipment.

Technical Parameters

  • Range:0 to 10000 mm, at steel velocity
  • Material Velocity: 100 to 20000m/s
  • Display Delay: -20 to 3400 µs
  • Probe Delay/Zero Offset : 0 to 99.99µs
  • Sensitivity Leavings: >62dB (flat-bottomed deep hole 200mmФ2)
  • Resolution : >40dB (5P14)
  • Noise Level: ≤8%
  • Test Modes: straight ,angle, dual element and thru-transmission
  • Pulse: Tunable Square Wave Pulse
  • Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
  • Pulse Energy: 200V, 300V, 400V, 500V selectable
  • Bandwidth (amplifier bandpass ): 0.2 to 20MHz
  • Gate Monitors: Two independent gates controllable over entire sweep range
  • Rectification: Positive half wave, negative half wave, full wave, RF
  • System Linear Error: Horizontal: +/-0.1% FSW, Vertical: 0.2% FSH, Amplifier Accuracy +/-1 dB.
  • Reject (suppression): 0 to 80% full screen height
  • Units: Inch or millimeter
  • Transducer Connections: BNC or LEMO
  • Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
  • Overall Dimensions:263H×170W×61D mm
  • Relative Humidity:(20 ~ 95)% RH
  • Power Supply:DC 9V
  • Operating Temperature: -10℃ to 50℃
  • Storage Temperature: -30℃ to 50℃

There are no products to list in this category.